Products from KNORR-BREM

Technical Information:
Air Inlet port(s) size: VOSS NG12 M22x1,5
Air Delivery port(s) size: VOSS NG12 M22x1,5
Purge control: Reservoir; Port: Voss NG8 M16x1,5
Safety valve pressure [bar]: 15,5
Unloader cut-out pressure [bar]: 12,5 +/0,2
Unloader pressure control range [bar]: 1,3 +0,7
With internal Silencer: No
Exhaust Connector: Snap-on Connector
Exhaust Silencer fitted: No
Heater Connector Type:
Bayonet ISO 15170 A1 2.1.1.Ag/K3
Heater Voltage [volts]: 24
Cartridge type: OSC
Cartridge connection type: M39x1,5 right hand thread

Technical Information:
Air Inlet port(s) size: M22x1,5
Air Delivery port(s) size: M22x1,5
Purge control: Reservoir; Port: M12x1,5
Safety valve pressure [bar]: 15,5
Unloader cut-out pressure [bar]: 11,0 +/-0,2
Unloader pressure control range [bar]: 0,7 +0,6
With internal Silencer: No
Exhaust Connector: Snap-on Connector
Heater Connector Type: Bayonet (2 x O4,0 + 1 x O4,5)
Cartridge connection type: M39x1,5 right hand thread

Technical Information:
Air Inlet port(s) size: M22×1,5
Air Delivery port(s) size: M22×1,5
Safety valve pressure [bar]: 13
Unloader cut-out pressure [bar]: 11
With internal Silencer: No
Exhaust Connector: Snap-on Connector
Exhaust Silencer fitted: No
Heater Connector Type: EAC 21 type
Heater Voltage [volts]: 24
Cartridge type: OSC
Cartridge connection type: M39x1,5 right hand thread

Technical Information:
Air Inlet port(s) size: M22x1,5
Air Delivery port(s) size: 21, 22, 23, 24:M16x1,5:
Purge control: Timed Purge
Tyre Inflator port size: Not included
Unloader cut-out pressure [bar]: 11,0 +/-0,2
Unloader pressure control range [bar]: 0,7 +0,6
Circuit 1: Feedback with Bypass
Circuit 1 - Open/close pressure [bar]:
>=7.5 / 6.5 ± 0.25
Circuit 1 - Pressure Limiting [bar]: Not included
Circuit 2: Feedback with Bypass
Circuit 2 - Open/close pressure [bar]:
>=7.5 / 6.5 ± 0.25
Circuit 2 - Pressure Limiting [bar]: Not included
Circuit 3: Feedback with no Bypass
Circuit 3 - Open/close pressure [bar]:
>=8.0 / >= 6.5
Circuit 3 - Pressure Limiting [bar]: Not included
Circuit 4: Feedback with no Bypass
Circuit 4 - Open/close pressure [bar]:
>=8.0 / >= 6.5
Circuit 4 - Pressure Limiting [bar]: Not included
Bleed-back safety feature:
Controlled by Circuit 1
Circuits' supply:
Internal series supply from Circuits 1 and 2 to 3 and 4
With Electrical pressure sensing: No
Exhaust Connector: Ø 16,0 mm Push Connector
Heater Connector Type: Heater not included
Heater Voltage [volts]: 0
Air dryer part number: K039116N00
Four circuit protection valve part number: II37461N00
Cartridge type: Conventional
Semi Electonic Control: No

Technical Information:
Air Inlet port(s) size: M12x1,5
Air Delivery port(s) size: 21: M12x1,5
Air Signal port(s) size: Not included
Height limitation port(s) size: Not included
Datum adjustment [deg.]: Not included
Height limitation [deg.]: Not included
Flow characteristic number: N2
Lever style: Flat
Lever length [mm]: Not included

Technical Information:
To suit wheel size: 22,5''
Has opposite handed version: K153783X50
Flange angle [°]: -12°/2°
Wear Sensor Type: without
Floating bearing variant: Rubber Bush Z000805

Technical Information:
Air Inlet port(s) size: VOSS NG8 M16x1,5
Air Delivery port(s) size: VOSS NG8 M16x1,5
Maximum delivery pressure [bar]: 8
With Microswitch: Yes
With Test position: Yes
With Emergency Release feature: No
Exhaust Connector: Ø 6,0 mm
Ports position: Side facing
Number of upright circuits: 1
Number of inverse circuits: 2
Mounting flange: Hexagonal flange
Unlocking actuation: Pull Ring