Products from KNORR-BREM
No results were found for the filter!
KB1110 Adjuster, braking system KNORR BREMSE AUTOMATIC SLACK ADJUSTOR Technical Information:
Has opposite handed version: KB1160
Effective length [mm]: 127/152/178
Lever offset [mm]: Left 25
Spline type: SAE 1,5" 10C
Torque Rating: PL24
Yoke pin diameter [mm]: 14,0 / 14,2
Maximum torque [Nm]: 2711
KB1160 Adjuster, braking system KNORR BREMSE AUTOMATIC SLACK ADJUSTOR Technical Information:
Has opposite handed version: KB1110
Effective length [mm]: 127/152/178
Lever offset [mm]: Right 25
Spline type: SAE 1,5" 10C
Torque Rating: PL24
Yoke pin diameter [mm]: 14,0 / 14,2
Maximum torque [Nm]: 2711
KB1505 Adjuster, braking system KNORR BREMSE SELF SETTING AUTOMATIC SLACK ADJUSTER Technical Information:
Has opposite handed version: KB1505
Effective length [mm]: 115/127/140/153/205±0,5
Lever offset [mm]: Straight
Spline type: SAE 1,5" 10C
Torque Rating: PL26
Yoke pin diameter [mm]: 14,0+0,2
Maximum torque [Nm]: 2950
KB1515 Adjuster, braking system KNORR BREMSE AUTOMATIC SLACK ADJUSTOR Technical Information:
Has opposite handed version: KB1515
Effective length [mm]: 105/125/140/155/180/250±0,5
Lever offset [mm]: Straight
Spline type: SAE 1,5" 10C
Torque Rating: PL26
Yoke pin diameter [mm]: 14,0+0,2
Maximum torque [Nm]: 2950
KB8001 Adjuster, braking system KNORR BREMSE AUTOMATIC SLACK ADJUSTOR Technical Information:
Has opposite handed version: KB8001
Effective length [mm]: 120/135/150/165/180/215/250
Lever offset [mm]: Straight
Spline type: SAE 1,5" 10C
Torque Rating: PL24
Yoke pin diameter [mm]:
14,1 (4 of),11,0 (2 of) & 17,0 (1 of)
Maximum torque [Nm]: 2710
KB8011 Adjuster, braking system KNORR BREMSE AUTOMATIC SLACK ADJUSTOR Technical Information:
Has opposite handed version: KB8011
Effective length [mm]: 120/135/150/165/180/215/250
Lever offset [mm]: Straight
Spline type: SAE 1,5" 10C
Torque Rating: PL24
Yoke pin diameter [mm]:
14,1 (4 of),11,0 (2 of) & 17,0 (1 of)
Maximum torque [Nm]: 2710
KB8021 Adjuster, braking system KNORR BREMSE AUTOMATIC SLACK ADJUSTOR Technical Information:
Has opposite handed version: KB8021
Effective length [mm]: 120/135/150/165/180
Lever offset [mm]: Straight
Spline type: SAE 1,5" 10C
Torque Rating: PL24
Yoke pin diameter [mm]: 14,1 (4 of),11,0 (1 of)
Maximum torque [Nm]: 2710
KB8031 Adjuster, braking system KNORR BREMSE AUTOMATIC SLACK ADJUSTOR Technical Information:
Has opposite handed version: KB8031
Effective length [mm]: 120/135/150/165/180
Lever offset [mm]: Straight
Spline type: SAE 1,5" 10C
Torque Rating: PL24
Yoke pin diameter [mm]: 14,1 (4 of),11,0 (1 of)
Maximum torque [Nm]: 2710
KB8071 Adjuster, braking system KNORR BREMSE AUTOMATIC SLACK ADJUSTOR Technical Information:
Has opposite handed version: KB8071
Effective length [mm]: 120/135/150/165/180
Lever offset [mm]: Straight
Spline type: SAE 1,5" 10C
Torque Rating: PL24
Yoke pin diameter [mm]: 14,1 (4 of),11,0 (1 of)
Maximum torque [Nm]: 2710
_600x600@2x.jpg "II19208")
II19208 Air Dryer, compressed-air system AIR DRYER Technical Information:
Air Inlet port(s) size: VOSS NG12 M22x1,5
Air Delivery port(s) size: VOSS NG12 M22x1,5
Purge control: Reservoir; Port: Voss NG8 M16x1,5
Safety valve pressure [bar]: 15,5
Unloader cut-out pressure [bar]: 12,5 +/-0,2
Unloader pressure control range [bar]: 1,3 +0,7
With internal Silencer: No
Exhaust Connector: Snap-on Connector
Exhaust Silencer fitted: No
Heater Connector Type: Heater not included
Cartridge type: Conventional
Cartridge connection type: M39x1,5 right hand thread
K116869N50 Air Dryer, compressed-air system AIR DRYER Technical Information:
Air Inlet port(s) size: M22×1,5
Air Delivery port(s) size: M22×1,5
Purge control: Timed Purge
Safety valve pressure [bar]: 13
Unloader cut-out pressure [bar]: 10+/-0,2
Unloader pressure control range [bar]:
1,25+/-0,25
With internal Silencer: No
Exhaust Connector: Snap-on Connector
Exhaust Silencer fitted: Yes
Heater Connector Type:
Bayonet ISO 15170 A1 2.1.1.Ag/K3
Heater Voltage [volts]: 24
Cartridge type: Conventional
Cartridge connection type: M41x1,5 right hand thread
K116880N50 Air Dryer, compressed-air system KNORR BREMSE AIR DRYER Technical Information:
Air Inlet port(s) size: M22×1,5
Air Delivery port(s) size:
23: N10164NG8 (M16x1,5), 24: N10164NG12 (M22x1,5)
Purge control: Timed Purge
Safety valve pressure [bar]: 13 +4
Unloader cut-out pressure [bar]: 10.4±0.2
Unloader cut-in pressure [bar]: 8.8
Unloader pressure control range [bar]: 1.6±0.2
With internal Silencer: No
Exhaust Connector: Exhaust Silencer fitted
Exhaust Silencer fitted: Yes
Heater Connector Type: Bayonet ISO 15170 A1 - 2.1.14
Heater Voltage [volts]: 24
Cartridge type: Conventional
Cartridge connection type: M41x1,5 right hand thread
Viewed